Film connection of melt-blown cloth slitting machine:

When there is a film on the slitter and the reel joint is changed, use the vacuum film connection table to start the film connection table to the working position, manually flatten the film on the first traction roller of the slitter and start the upper vacuum pump to suck the film to make the film Flatly adsorbed on the film receiving table, paste double-sided tape and cut off the excess film under the tape, flatten the film on the unwinding rack and start the lower vacuum pump to make the film flat adsorption, remove the tape on the paper layer and smooth Adhesive film, joints should be neat and wrinkle-free, then turn off the upper and lower vacuum pumps, and open the film receiving table to the inoperative position.